Gas Conversion; Tools And Parts For Gas Conversion - KitchenAid 720-0893D LP Instructions D'installation Et Guide D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Components
Main Burner
Searing Burner (SSB)
Side Burner (SB)
IMPORTANT: The different burner valves in this grill have different BTU ratings. This means that the amount of gas coming from
each orifice varies in order to create the BTU's. The holes in the orifices themselves are drilled to different sizes so as to allow the
proper amount of gas to flow through them. Please note the chart above as an easy reference for the various orifice opening sizes
for the different valves in the grill.
WARNING
This conversion kit shall be installed by
a qualified service agency in
accordance with the manufacturer's
instructions and all applicable codes
and requirements of the authority
having jurisdiction. If the information in
these instructions is not followed
exactly, a fire, explosion or production
of carbon monoxide may result causing
property damage, personal injury or
loss of life. The qualified service agency
is responsible for the proper installation
of this kit. The installation is not proper
and complete until the operation of the
converted appliance is checked as
specified in the manufacturer's
instructions supplied with the kit.

GAS CONVERSION

720-0893D (LP), 730-0893D (NG) orifice sizes
Liquid Propane (LP)
Orifice Size
0.99 mm
1.15 mm
1.02 mm
BTU/HR
11,000
15,000
12,000

Tools and Parts for Gas Conversion

Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
Parts supplied
Natural gas orifices
Parts needed
Natural gas conversion kit Part Number 710-0003. See
"Assistance" section to order. The conversion kit includes:
(NOT INCLUDED WITH APPLIANCE)
Natural gas regulator 4" W.C. (marked "Natural Gas
Regulator")
3.0 m / 10 ft Natural gas hose with quick connector
150 mm / 5.9 in Natural gas regulator hose
6 mm nut driver
6 mm wrench
Hex key
IMPORTANT: Gas conversions must be done by a qualified
installer. Before proceeding with conversion, shut off the gas
supply to the grill.
28
Natural Gas (NG)
Orifice Size
BTU/HR
1.59 mm
1.90 mm
1.70 mm
6mm
11,000
15,000
12,000

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

730-0893d ng

Table des Matières