Menu Settings; Changing Settings - Siemens TI 905 Série Mode D'emploi

Masquer les pouces Voir aussi pour TI 905 Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

en Menu settings
Q

Menu settings

This menu is used for changing settings
M e n u s e t t i n g s
individually, accessing information and
starting a programme.

Changing settings

Press and hold the $/± button for at
1.
least 5 seconds to open the "Menu".
The different setting options will
appear in the display.
Make the desired setting using the
2.
rotary selector.
The current setting is highlighted in
colour on the display.
Press the navigation button under
3.
"select".
Use the rotary selector to change the
4.
setting.
The following settings are available:
Settings
Language
Water hardness
Switch off after
Brightness display
54
Possible settings
Different languages
1 (soft)
2 (medium)
3 (hard)
4 (very hard)
Softening device
15 minutes
up to
3 hours
Level 1 up to level 10
Standard setting 7
Press the navigation button under
5.
"confirm".
The setting has been saved.
Press the $/± button to exit the
6.
"Menu".
The drink selection appears on the
display.
Notes
You can switch to the previous level
by pressing the navigation button
under "back".
The setting procedure can be
aborted by pressing the navigation
button under "abort".
Press the $/± button to exit the
menu at any time.
If no entry is made within approx. 2
minutes, the menu closes
automatically and the settings are
not saved.
Explanation
Setting the language to be used for display texts.
Setting in line with the hardness of the local
water supply.
The preset water hardness is level 4 (very hard).
The water hardness can, for example, be
requested from your local water supplier.
It is important to set the water hardness cor-
rectly, so that the appliance indicates accurately
when the descaling programme should be run.
If a water softening system is installed in the
house, please select the "Softening device" set-
ting.
Setting that governs how long the appliance
should wait after the last beverage preparation
before it automatically switches itself off.
The factory setting is 30 minutes.
Setting that governs the brightness of the dis-
play

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ti 907 sérieTi 909 série

Table des Matières