Vintec A17653101 Guide D'utilisation Et D'entretien page 20

20 Troubleshooting
Problem
Alarm(s) will not
shut off.
Power is not restored
after power failure.
Door does not
close properly.
Possible Cause
• Door is ajar.
• Power has failed.
• Internal temperature
is too high.
• Circuit breaker has
tripped.
• Door hinges are
misaligned.
• Door gasket is not
sealing properly.
Remedy
• Press "Alarm" key to
acknowledge alarm.
• Ensure door is closed firmly.
• Allow 24 hours for
temperature to stabilize.
• Verify electrical supply. See
"Installation" section.
• Recommend unplug and plug
the unit back in.
• Loosen hinges and re-align
door. Retighten hinges.
• Turn gasket 180°.