Vintec A17653101 Guide D'utilisation Et D'entretien page 14

14 Controls and Settings
Simultaneously press and hold Mode and
Upper Temp Set "∧" buttons for 5 seconds
to reset wine cabinet to factory settings.
When activated, Upper and Lower
temperature displays blink "dE" and "On"
respectively for 5 seconds.
Any alert turns off temporarily.
Every 5 minutes after Demo mode is
activated, Lower and Upper temperature
displays blink "dE" and "On" for 5
seconds.
When deactivated, Lower and Upper
temperature displays blink "dE" and "OF"
respectively for 5 seconds.
Any alert turns off temporarily.
Reset to
Factory
Settings
Demo Mode
Simultaneously
press and hold
the Mode and
Light buttons for
10 seconds to
activate/deactivate
Demo mode.
Temp Set "∨" button and Light button for 5
seconds to toggle sounds off and on.
The default setting for sounds is On.
Pressing and holding the mute
combination buttons will toggle the Lower
Temp display between 'OF' and 'On'. If
'On', sounds are enabled. If 'Of', sounds
are muted. 'OF' or 'On' will display for 2
seconds then the display switches back to
the previous temperature setting.
High/Low Temperature Alert
If the Current temperature is 9 ºF above
the Set temperature for more than 60
minutes, both temperature displays show
"Hº" and the alert icon blinks red.
If the Current temperature is 4 ºC below
the Set temperature for more than 60
minutes, both temperature displays show
"Lº" and the alert icon blinks red.
Either temperature sensor can trigger a
high or low temperature alert.
The alerts will not sound in the first 90
minutes after power on.
Control Sounds
Simultaneously press
and hold the Lower