Danby DPAC8512 Guide D'utilisation Et Soins De Propriètaire page 15

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation Instructions
WATER DRAINAGE
• During dehumidifying modes, remove the drain plug from the back of the
unit, install the drain connector (5/8" universal female connecter) with
3/4" hose (locally purchased). For the models without a drain connector,
just attach the drain hose to the hole. Place the open end of the hose
directly over the drain area in your basement floor. Please refer to
Fig.22 & 23.
• When the water level of the bottom tray reaches a predetermined level,
the unit beeps 8 times, the digital display area shows P1. At this time
the air conditioning/dehumidification process will immediately stop.
However, the fan motor will continue to operate (this is normal).
Carefully move the unit to a drain location, remove the bottom drain plug
and let the water drain away (Fig.24). Restart the machine until the P1
symbol disappears. If the error repeats, call for service.
NOTE: When operating or draining water always protect carpeting or
floors from possible water spillage.
Fig.22
Fig.23
Fig.24
14
Remove the
drain plug
Continuous
drain hose

Publicité

Table des Matières
loading

Table des Matières