CoolPower MPS35
5
Technical description
The mains rectifier can operate all coolers and refrigerators with BD35F com-
pressors at 110 – 240 V~.
With a 110 – 240 V~ mains connection, the rectifier automatically switches
from battery to mains operation.
When disconnected from the 110 – 240 V~ mains supply, the rectifier auto-
matically switches back to battery operation. Mains operation via the rectifier
always takes priority over battery operation.
5.1
Control elements
Item
in fig. 1, page 3
1
2
3
4
6
Mounting the mains rectifier
If you wish to mount the mains rectifier in a fixed position, please observe the
following mounting instructions:
NOTICE!
A
Fix the mains rectifier in upright position only. In case you have to
install the rectifier in a different position put the rectifier in a fire
resistant housing to prevent any fire being roused to other objects
by hot plastic tripping through the air slots.
Do not mount the device
– In wet or damp environments
– In the vicinity of combustible materials
– In areas where there is a danger of explosions
Make sure the socket is near the device and is easily accessible.
EN
Explanation
Mains cable
Battery input terminals
Compressor output terminals
Fastening holes
Technical description
17