Viscount Chorum 10 Dlx Mode D'emploi page 33

Chorum 10 Dlx – Chorum S10
N.B.
If the USB stick is inserted and pressing [MEMORY] the [USB] LED does not light up, this means
that the USB stick has not been recognized by Chorum 10. Make sure the pen is inserted correctly,
that it is not damaged or defective and that the pen is formatted in FAT or FAT32.
12. [SONG] buttons: buttons for recording and playing songs. [REC] calls up the recording mode,
[START/STOP] starts playing songs. Refer to chapter 4 for more information.
13. [SPLIT] button: activates (LED on) and disables the Split of the Keyboard. In fact, the instrument
can play as if it were equipped with two separate manuals, one using Manual II voices (right of the
Split key included), and another using Manual I and Bass voices (left of the Split). For a detailed
description of Split mode, refer to par. 3.1.
14. Sub and super octave: these buttons can be used to transpose Manual I voices with the[MAN. I 4']
button one octave upwards, and Manual II voices with the[MAN. II 16'] button one octave down.
15. [STYLE] button: the Chorum 10 has four organ styles, each of which refers to a particular aesthetic
of sound: Baroque (Led [BA]), Northern European Baroque (Led [BK]), Romantic (Led [RO]) and
Symphonic (Led [SY]). Through this button it is possible to select the timbre best suited to the musical
literature to be performed.
16. [MAN. I ORCHESTRA] buttons: buttons for activation (LED on) and deactivation of orchestral
voices for Manual I. Different orchestral timbres are available for each ORCHESTRA button. For the
selection of the desired voice refer to par. 3.6.
17. General combination buttons: buttons for recall of register combinations. These combinations are
adjustable. To store one, after activating the desired registers, keeping the [SET] button pressed, press
the button of the combination that you wish to store.
By pressing the button of the combination currently selected (button with LED on), you return to the
configuration of the registers prepared by hand before selecting a combination (HR function).
By holding down for a few moments the button of the currently selected combination, all the registers
currently switched on are switched off (function Cancel or Cancel).
18. [BANK] button: select bank A or B of the general combinations.
19. [MAN. II ORCHESTRA] buttons: buttons for activation (LED on) and deactivation of the
orchestral voices for Manual II. Different orchestral timbres are available for each ORCHESTRA
button. For the selection of the desired voice refer to par. 3.6.
EN - 5
User Manual