i-tec HUNDERBOLT 3 Mode D'emploi page 7

Video output requirements: device with a free USB-C port with "DisplayPort
Alternate Mode" support or with Thunderbolt 3 port.
Operating system: Windows 10, macOS, Android, Chrome OS, and Linux with
the latest updates
Automatic driver installation in WINDOWS / macOS operating systems.
If you need to install LAN, download the latest drivers from our website
www.i-tec.cz/en/ in the "Download" tab of this product.
NOTICE!
Before plugging in the docking station, make sure you have the latest drivers
for your device and an updated BIOS installed.
CONNECTING A HDMI / DISPLAYPORT MONITOR
The docking station is equipped with 1x HDMI and 2x DisplayPort 4K port for
the connection of an external monitor or projector with a HDMI / DP interface.
Connect the monitor to the docking station using a high quality HDMI / DP
cable. During installation of an additional monitor the screen of the device can
flicker which is a standard condition
If the USB-C/Thunderbolt™ 3 only supports DisplayPort 1.2, the maximum
resolution is 4K 3840x2160/30Hz.
If the USB-C/Thunderbolt™ 3 only supports DisplayPort 1.4 without DSC, the
maximum resolution is 2x 2560x1440/60Hz.
- 1 monitor connected via 2 DisplayPort
cables - resolution up to 5K
5120x2880/60Hz.
5K resolution is only supported if your
laptop's USB-C/Thunderbolt™ 3 connector
supports DisplayPort 1.4 DSC.
- 1 monitor connected via DisplayPort/
HDMI cable -
3840x2160/60Hz.
4K/60Hz resolution is only supported
if your laptop's USB-C/Thunderbolt™ 3
connector supports DisplayPort 1.4 DSC or
DisplayPort 1.4 without DSC.
- 2 monitors connected via DisplayPort/
HDMI cables - resolution up to 4K
3840x2160/60Hz.
Only if your laptop's USB-C/
Thunderbolt™ 3 connector supports
DisplayPort 1.4 DSC.
Quick Start
resolution up
ENGLISH
to 4K
| 7