Olympia ECS 518.4 CCD Mode D'emploi page 20

5.2 ECS function (automatic EcoShred operation)
2
When the ECS function is activated, the shredding operation of the cutting mechanism
starts up automatically as soon as material is inserted in the respective infeed slot:
The device switches to forward drive and draws the material in.
●
5 seconds after shredding is finished, the device switches off automatically.
●
The ECS function is activated by pressing the ECS button. The ECS button then lights up
blue.
When the ECS function is activated, paper can be shredded via the paper
Note:
infeed, CDs and DVDs shredded via the CD infeed and credit cards shred-
ded via the credit card infeed. Only one infeed may be used at a time. If
you use more than one infeed, the device stops. Pay attention to the per-
missible quantity of material which can be shredded.
When the ECS function is activated, the device has a very low power con-
Note:
sumption.
5.3 Shredding paper
A maximum of 18 sheets of A4 paper with a weight of maximally 70 g/m
Note:
may be inserted in the paper infeed at a time.
Remove any other material from the paper, such as paper clips or labels.
Note:
1. The device is switched on and the ECS function is activated.
2. Insert paper in the paper infeed.
5.4 Shredding CDs and DVDs
Only insert one CD or DVD at a time for the shredding process.
Note:
1. The device is switched on and the ECS function is activated.
2. Insert the CD or DVD in the CD infeed.
5.5 Shredding credit cards
Only insert one credit card at a time for the shredding process.
Note:
1. The device is switched on and the ECS function is activated.
2. Insert the credit card in the credit card infeed.
5.6 Emergency stop
If the ECS function is activated or forward or reverse operation are on, you can stop the
device immediately in an emergency situation by pressing the ECS button.
5.7 Switching the device off
Set the On/Off switch to its OFF position.
2
Abbreviation for EcoShred
20
2