Controls And Instruments - Dolmar TM-98.14 H2D Manuel D'utilisation

CONTROLS AND INSTRUMENTS

4. CONTROLS AND INSTRUMENTS
4.6
4.5
4.2
4.8
4.1 STEERING WHEEL
Turns the front wheels.
4.2 THROTTLE
This regulates the engine's r.p.m. The positions are indicated on a plate showing the
following symbols:
«CHOKE»
«SLOW»
«FAST»
– The «CHOKE» position enriches the mixture so must only be used for the time nec-
essary when starting from cold.
– When moving from one area to another, put the lever in a position between «SLOW»
and «FAST».
– When cutting, shift into «FAST».
4.3 KEY IGNITION SWITCH
This key operated control has three positions:
«OFF»
«ON»
4.1
cold starting
for minimum engine speed
for maximum engine speed
everything is switched off;
activates all parts;
4.7 4.3
B
A
B
13
EN
A
4.4