Lawn Maintenance - Dolmar TM-98.14 H2D Manuel D'utilisation

Masquer les pouces Voir aussi pour TM-98.14 H2D:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

28
EN
prevent the risk of tipping over. Reduce the forward speed before going on a
slope, particularly downhill.
DANGER!
!
cause you to lose control of the vehicle, especially on slippery ground.
Mechanical transmission:
DANGER!
!
clutch out! Always shift into a low gear before leaving the machine at a
standstill and unattended.
Hydrostatic transmission:
Go down slopes with your foot off the drive pedal (
of the hydrostatic drive when the transmission is not engaged.
5.6 TRANSPORTING
WARNING!
!
able equipment for lifting and enough people for the weight involved and the
type of lifting system used. The machine must never be lifted by rope and tack-
le. During transport, close the fuel stopcock (
deck, apply the parking brake and fasten the machine securely with ropes or
chains to the hauling device.

5.7 LAWN MAINTENANCE

1. To keep a lawn green, soft and attractive, it should be cut regularly without damag-
ing the grass. A lawn can be composed of different types of grass. If the lawn is cut
frequently, grass and roots grow more vigorously, forming a solid grassy bed. If the
lawn is cut is less frequently, higher grass and weeds start growing (plus daisies and
clovers, etc.).
2. It is always better to cut the grass when dry.
3. The blades must be in good condition and well sharpened so that the grass is cut
straight without a ragged edge that leads to yellowing at the ends.
Never use reverse to reduce speed going downhill: this could
Never ride the machine on slopes in neutral or with the
If the machine is transported on a truck or trailer, use suit-
HOW TO USE THE MACHINE
4.32), to use the braking effect
if fitted), lower the cutting

Publicité

Table des Matières
loading

Table des Matières