Free Warning Label Replacement - DeWalt DWV012 Guide D'utilisation

LATIN AMERICA: This warranty does not apply to products sold
in Latin America. For products sold in Latin America, see country
specific warranty information contained either in the packaging, call
the local company or see website for warranty information.
FREE WARNING LABEL REPLACEMENT: If your warning labels
become illegible or are missing, call 1-800-4-D
replacement.
Troubleshooting
PROBLEM SOLUTION
Motor does not run Check power cord, plugs and outlet.
Ensure the on/off /tool control switch is in
the ON position ( ).
Suction capacity Remove blockages in the suction nozzle,
decreases suction tube, suction hose or filters.
Replace the paper or fleece bag.
Check for proper installation of the filters.
Clean or replace the filters.
Empty canister, refer to Empty Canister
under Operation.
Vacuum stops running Thermal overload has been tripped:
1. Turn the vacuum off and disconnect
vacuum cleaner from power source.
2. Empty the canister, if needed.
3. Allow the unit to cool.
4. Plug
appropriate outlet and turn on/off/tool
control switch to the ON position ( )
to test. If vacuum will not restart call
1-800-4-D
WALT for a free
E
the power cord into an
WALT (1-800-433-9258).
E
10
PROBLEM SOLUTION
Dust comes out while Check for proper installation of the filters.
vacuuming
Ensure filters are not damaged; replace if
necessary.
Ensure filter seals are in place and are
secure.
Automatic filter Listen for the solenoid clicking to ensure
cleaning is not the filter cleaning mechanism is working.
working
Power tool does not Ensure the on/off/tool control switch is in
turn on. the ACTIVATION position
SPECIFICATIONS
Volts
Hertz
Rated Current
Maximum speed current
Minimum speed current
Capacity
Weight
.
DWV012
120 V ~
60
15 A per UL1017
11.6 A
7 A
10 gallon (38 liters)
33.5 lbs. (15.1 kg)