Wolf FWS-2-60L Instructions De Montage page 31

Installation
Wall mounting
Installation on a stratification
cylinder
Threaded sleeves
3064928_201607
Freshwater module installation instruc-
tions
Positioning and installation may only be carried out by an authorised contractor.
The system must be installed in a location that is protected from frost.
Use the mounting hardware supplied with the system (Adapter plate, 2 coun-
tersunk bolts M10x22 + 2 x M10 nuts + 2 x M10 washers) to install it on a
stratification cylinder.
After installing the buffer cylinder insulation, turn the threaded studs about
10mm into the threaded sleeves located on the cylinder.
Use the corrugated pipe cylinder connection set, a secure and time-saving
connection, for installing the system on stratification cylinders.
31