Publicité
Les langues disponibles
Les langues disponibles
13
Attach the Front base frame (23) into the Back base frame (24) using three
M8X45mm bolts (A30) , three M8 arc washers (F1) and three M8 locknuts (C2). Re-
peat this step on the other side of the weight system.
14
Attach the wheel carriage assembly (25) using two M8X55mm button bolts (B1) , two
M8 spring washers (G1) and two M8 locknuts (C2) . Repeat this step on the other
side of the weight system.
15
1.
Assemble the adjustment foot (26).
2.
Attach the M10X65mm bolt (A12) , and M10X80 Bolt (A13), three M10 wash-
ers (D3), and two M10 locknuts (C3). Repeat this step on the other side of the
weight system.
3.
Fix the base frame
Tighten all of the bolts in the above steps.
16
1.
Insert the support pole (27) into the sleeve and bottom tube using two
M6X30mm bolts (A28) , two M6X45mm bolts (A29) and four M6 locknuts (C1).
2.
Insert the support pole (27) into the sleeve on the sandbag box (32) .
3.
Thread the four ropes of sandbag box (32) through the frame base tube and tie
them on sandbag box (32) hook. Then pull the rope tight.
17
1.
Fill sandbags, about 55 KG.
2.
Attach the base and the main frame using three M10X100mm bolts (A8), three
M10 arc washers (F2) and three locknuts with caps (C5) .
3.
Rotate the main frame assembly so that the base stands horizontally on the fl oor,
and then place a bag of sand.
18
Distinguish struts (28, 29, 30 and 31) to base frame.
Galaxy
Basketball Systems
13
Publicité
