Basic Operation - Teac TN-175 Mode D'emploi

Playing records
o Remove the protective cap from the cartridge stylus before
using the turntable.
1
Press the STANDBY/ON button on the
back of the unit to turn it on.
2
Open the dust cover slowly.
V Be careful not to pinch your hand, for
example, when opening and closing the
dust cover.
3
Place a record on the platter.
When playing a 45 RPM large-hole single record, use the
included adapter.
6

Basic operation

4
Turn the record size selection lever to
select the record size.
5
Select the rotation speed indicated on
the record.
The rotation speed can be set to 33 1/3 or 45 RPM.
6
Press the START button to start playback.
The platter begins to turn, the tonearm moves to the
outer edge of the record, the stylus lowers to the record,
and playback begins.
o Close the dust cover during playback. Since doing
this prevents skipping caused by unintended contact
and blocks external sound pressure, it makes noise
less likely to occur.
o This playback operation cannot be stopped in the
middle.
V Do not place anything on top of the dust
cover.
ATTENTION
o During playback, do not touch the tonearm or the record.
Doing so could damage the stylus tip and cause scratches
on the record.
o Do not forcibly stop platter rotation during playback. Since
this product is not a turntable designed for DJs (direct
drive), doing something like this could cause malfunction.
During record playback, feedback could occur if the volume
is too loud. If this happens, lower the volume of the amplifier.
When playback finishes
When the tonearm reaches the lead-out groove of the record,
it will automatically rise and return to the tonearm holder, and
the platter will stop turning.
Starting playback from a track in the
middle of the record
1
Use the tonearm lifter lever to raise the
tonearm.
2
Move the tonearm so the cartridge sty-
lus is at the track to be played back.
When the tonearm is moved above the record, the platter
will start turning.
3
Use the tonearm lifter lever to lower the
tonearm.
The tonearm lowers slowly until the stylus touches the
record and playback begins.
Stopping playback in the middle
Press the STOP button during playback to make the tonearm
rise and return to the tonearm holder. This also stops the platter
turning.