Teac MC-D800 Mode D'emploi page 54

6 Press the TIME (j/k) buttons to select
the playback source and press the
TIMER button.
Display example
The sources that can be selected are CD, USB, FM
TUNER and AM TUNER .
Press the TIME (j/k) button to cycle through the
following source settings .
CD USB
AM TUNER
"BLUETOOTH" and "PHONO" cannot be set .
54
Wakeup timer (continued)
FM TUNER
7 Press the TIME (j/k) buttons to set
the volume level.
You can set the volume between 5 (minimum) and
32 (maximum) .
o When the wakeup timer turns the unit on, the
volume will gradually increase until the set vol-
ume is reached .
8
Press the TIMER button.
Timer indicator
The timer indicator appears .
This completes wakeup timer setting .
o The wakeup timer settings will be erased if
a power outage occurs or the power cord is
unplugged from an outlet .
o At the TIMER ON time, operation starts and the
timer indicator blinks .
Prepare the playback source before the
wakeup timer turns the unit on.
If you have selected "CD", place a disc .
If you have set "USB" as the playback source, connect a
USB flash drive .
o If a disc or USB flash drive is not loaded, the FM tuner
will be used .