Fimap FM43 ORB Manuel D'utilisation Et D'entretien page 29

6. Unscrew and remove the tightening keys (5) (Fig.7).
7. Insert the pad holder, being careful to centre the fixing pins (6) in
the appliance with the holes (7) in the pad holder (Fig.8).
7
ATTENTION: To tighten the keys correctly use a tightening
clamp.
If the pad holder is used for emery paper, proceed as follows:
• Unscrew and remove the tightening keys (5) (Fig.7).
• Insert the pad holder, being careful to centre the fixing pins (6) in
the appliance with the holes (7) in the pad holder (Fig.8).
• Insert the centring flange (8) (Fig.10).
• Insert the threaded grab (9), making sure to centre the fixing pins
in the appliance with the holes in the threaded grab (Fig.11).
Screw in the tightening keys (5).
10
9. Lightly tip the machine back (Fig.13), block one of the rear
wheels and shift the control column backwards.
13
8. Screw in the tightening keys (5) (Fig.9)
6
5
8
• Insert the emery paper disc above the pad holder.
• Fix the emery paper to the pad holder using the nut (10)
remembering to also insert the washer (11) (Fig.12).
8
11
10. Turn the brush head into the work position (Fig.13).
14
26
7
9
ATTENTION: To tighten the keys correctly use a tightening
clamp.
ATTENTION: To correctly tighten the nut, use a suitable tool.
8
5
12
5
11
10