Honda F560 Manuel De L'utilisateur page 42

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

1.Changing engine oil
Change the oil when the engine is warm to assure rapid and complete
draining.
1.Place a suitable container below the engine to catch the used oil, and
then remove the oil filler cap, drain bolt, and sealing washer.
2.Tilt the tiller slightly forward and allow all of the oil to drain.
3.Allow the used oil to drain completely, and then reinstall the drain
bolt with a new sealing washer. Tighten the bolt securely.
4.Refill with the recommended oil (see page 14) to the upper limit.
5.Reinstall and tighten the oil filler cap.
Oil capacity: 0.58 L (0.61 US qt, 0.51 lmp qt)
DRAIN BOLT
Wash your hands with soap and water after handling used oil.
NOTE:
Please dispose of used motor oil in a manner that is compatible with
the environment. We suggest you take it in a sealed container to your
local service station for reclamation. Do not throw it in the trash or pour
it on the ground.
OIL FILLER CAP
UPPER LIMIT
39

Hide quick links:

Publicité

Table des Matières
loading

Table des Matières