Installation Guide
Adjustment range for 3-axis adjustment unit installation position
Control Pad
Control Pad (external dimensions/weight)
• Weight: approx. 240 g (not including batteries and rubber feet)
• Operating temperature: 0 to +50°C (no condensation)
• Operating temperature: -20 to +60°C (no condensation)
Cable routing holes
When routing cables through a wall, use the position (
Otherwise, remove the cable cover (
groove at the back of the Control Pad.
) in the following figure as the cable routing hole.
) and route the cables from there. Route the printer cable along the
14
[Unit: mm]
[Unit: mm]