Dörr SVL-180 PB Notice D'utilisation page 8

06 | MOUNTING
06.1 MOUNTING ON A CAMERA/CAMCORDER WITH FLASH HOT SHOE
Screw the universal flash hot shoe (13) into the ¼" connection thread (1) of the
video light.
Then slide the universal flash hot shoe (13) into the hot shoe mount of your camera
or your camcorder. Tighten the locking screw (13a).
06.2 MOUNTING/UNMOUNTING THE DIFFUSOR PLATE
The white diffuser plate (10) provides soft light and reduces harsh shadows.
Slide the diffusor plate (10) from above until it is centred on the front panel (9) of
the video light. The holders of the diffusor plate (10a) must not cover the control
buttons (3,4,5).
Push the diffuser plate (10) upwards to remove it from LED front panel again.
07 | CLEANING AND STORAGE
Never use aggressive cleansing agents or benzine to clean the device. We recom-
mend a soft, slightly damp microfiber cloth to clean the outer parts of the device.
Before cleaning make sure to switch off the device and take off from power supply!
Store the device in a dust-free, dry and cool place. This device is not a toy – keep it
out of reach of children. Keep away from pets.
08 | TECHNICAL SPECIFICATIONS
Number of LEDs
LED Power max.
Colour temperature
Illumination power approx.
Dimmer
Colour Rendering Index (CRI)
Power supply
Runtime full power
(with fully charged battery)
Charging current
Port
Output power
Dimensions
Weight
09 | CONTENT
1x SLIM LED Video Light SVL-180 PB
1x Universal flash hot shoe
1x USB-C charging cable
1x Mini USB charging adapter
1x Diffusor plate white
1x Storage pouch
1x Safety hints
SVL-180 PB
180
12 W
3200 - 5600 K (± 300 K)
1000 Lux/1 m
5 - 100%
> 96 R
a
3.85 V, 4040 mAh
Built-in Lithium Polymer battery
approx. 1,5 hours
5V 1A / 5V 2A
USB-C & Micro USB
5V 2A via USB-A
15 x 8 x 1 cm
ca. 190 g
10 | DISPOSAL, CE MARKING
10.1 DISPOSAL OF BATTERIES/ACCUMULATORS
Batteries are marked with the symbol of a crossed out bin. This symbol indi-
cates that empty batteries or accumulators which can no longer be charged
should not be disposed of with household waste. Waste batteries may contain
harmful substances that can cause damage to health and to the environment.
Please use the return and collection systems available in your country for the
disposal of the waste batteries.
10.2 WEEE INFORMATION
The Waste Electrical and Electronic Equipment Directive (WEEE Directive) is
the European community directive on waste electrical and electronic equip-
ment, which became European law in February 2003. The main purpose of
this directive is to prevent electronic waste. Recycling and other forms of
waste recovery should be encouraged to reduce waste. The symbol (trash
can) on the product and on the packing means that used electrical and elec-
tronic products should not be disposed of with general household waste. It
is your responsibility to dispose of all your electronic or electrical waste at
designated collection points. Disposing of this product correctly will help
to save valuable resources and it is a significant contribution to protect our
environment as well as human health. For more information about the cor-
rect disposal of electrical and electronic equipment, recycling and collection
points please contact your local authorities, waste management companies,
your retailer or the manufacturer of this device.
10.3 ROHS CONFORMITY
This product is compliant with the European RoHS directive for the restriction
of use of certain hazardous substances in electrical and electronic equipment
and its amendments.
10.4 CE MARKING
The CE marking complies with the European standards and indicates that the
product meets the requirements of the applicable EU directives.
08