Main Function Of Keys; Reverse Key; Auto-Lock Key; Up/Down Needle Key - ELNA eXperience 520 Mode D'emploi

Table des Matières

Publicité

e
w
q
q
w
e
r
t

Main Function of Keys

q Reverse Key
If you are sewing 1, 2 (straight stitches), 8 (zigzag
stitch) or 9 (3-step zigzag stitch),
and hold this key. The machine will sew in reverse
until you release the key while using the foot
control.
If you are sewing any other stitches, utility or
decorative, the machine will immediately stop and
sew a lockstitch when you press this key.
w Auto-Lock Key
Press this key while sewing 01, 02 (straight
stitches), 08 (zigzag stitch) or 09 (3-step zigzag
stitch)
stitches in place and stop automatically.
Press this key while sewing utility or decorative
stitches and the machine will complete the stitch,
lockstitch and stop.
e Up/Down Needle Key
If the needle is up when you press this key, the
needle will go down to its lowest position. The
needle will continue to stop in the down position
If the needle is down when you press this key, the
needle will go to its highest position. The needle will
continue to stop in the up position.
NOTE: The needle will always stop in the up
position after auto thread cutting or buttonholes.
10
and the machine will sew a few
press

Publicité

Table des Matières
loading

Table des Matières