Télécharger Imprimer la page

DeWalt DXCMH1608WB Guide D'utilisation page 7

Publicité

Les langues disponibles

Les langues disponibles

Attachments & accessories:
• Exceeding the pressure rating
of air tools, spray guns, air
operated accessories, tires
and other inflatables can
cause them to explode or
fly apart, and could result in
serious injury.
tires:
• Over inflation of tires could
result in serious injury and
property damage.
WARNING: RISk fROM flYING OBjECTS
WHAt CAn HAPPen
• Follow the equipment
manufacturers recommendation
and never exceed the
maximum allowable pressure
rating of attachments. Never
use compressor to inflate small
low pressure objects such
as children's toys, footballs,
basketballs, etc.
• Use a tire pressure gauge to
check the tires pressure before
each use and while inflating
tires; see the tire sidewall for
the correct tire pressure.
note: Air tanks, compressors
and similar equipment used to
inflate tires can fill small tires
very rapidly. Adjust pressure
regulator on air supply to no
more than the rating of the tire
pressure. Add air in small incre-
ments and frequently use the tire
gauge to prevent over inflation.
HoW to PreVent It
• The compressed air stream
can cause soft tissue damage
to exposed skin and can
propel dirt, chips, loose
particles and small objects
at high speed, resulting in
property damage or personal
injury.
WARNING: RISk Of HOT SURfACES
WHAt CAn HAPPen
• Touching exposed metal such
as the compressor head,
engine head, engine exhaust
or outlet tubes, can result in
serious burns.
7
• Always wear certified safety
equipment: ANSI Z87.1 eye
protection (CAN/CSA Z94.3)
with side shields when using
the compressor.
• Never point any nozzle or
sprayer toward any part of
the body or at other people or
animals.
• Always turn the compressor off
and bleed pressure from the
air hose and air tank before
attempting maintenance,
attaching tools or accessories.
HoW to PreVent It
• Never touch any exposed
metal parts on compressor
during or immediately after
operation. Compressor will
remain hot for several minutes
after operation
• Do not reach around
protective shrouds or attempt
maintenance until unit has
been allowed to cool.

Publicité

loading