Getting Started - Sony WEGA Trinitron KV-BZ216 Mode D'emploi

x Getting Started
*
Select Confirm
GB
4
Step 1
Insert the batteries (supplied) into the remote.
• Do not use old or different types of batteries together.
Step 2
Connect the antenna cable (not supplied) to 8
(antenna input) at the rear of the TV.
• You can also connect your TV to other optional
components (see page 6).
Step 3
Plug in the power cord, then press ! * on the TV to
turn it on.
* Main power button icon is 1 for KV-BZ216M80.
• The 1 (standby) indicator flashes green for a few seconds
when turning on the TV. This does not indicate a
malfunction.
Step 4
Set up the TV by following the instructions of the
"Initial Setup" menu (see page 5).
End