Bosch Professional GBH 18 V-EC Notice Originale page 12

OBJ_BUCH-1644-001.book Page 12 Thursday, May 24, 2012 9:40 AM
12 | English
Symbol Meaning
L Sound pressure level
pA
a Vibration total value
h
K Uncertainty
Delivery Scope
Rotary hammer, auxiliary handle and depth stop.
Application tools and other accessories shown or described
are not part of the standard delivery scope.
A complete overview of accessories can be found in our ac-
cessories program.
Intended Use
The machine is intended for hammer drilling in concrete,
bricks and masonry, as well as for light chiselling work. It is al-
so suitable for drilling without impact in wood, metal, ceram-
ics and plastic, as well as for screwdriving.
Mounting and Operation
The following table indicates the action objectives for mounting and operation of the power tool. The instructions for each action
objective are shown aside. Depending on the type of application, various instruction combinations are required. Observe the
safety instructions.
Action
Changing the position of the auxilia-
ry handle
Removing the battery
Inserting the battery
Checking the battery charge condi-
tion
1 619 929 K98 | (24.5.12)
Technical Data
The technical data of the machine are listed in the table on
page 174.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 24.05.2012
Figure
1
2
3
4
100 %
0 %
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Please observe
Bosch Power Tools
Page
175
175
175
176