Lap Belt; Using The Wheelchair; Getting In And Out From The Side; Getting In And Out From The Front - B+B Pyro Start Mode D'emploi

PYRO START
| Lightweight wheelchair

5.3. Lap belt

There is also an optional lap belt available to order which secures
wheelchair users who do not have the required stability for sitting in a
wheelchair (Fig. 20).
• The Pyro Start can be equipped with a seat belt on the backrest
tube.
• Use the buckle to open and close the belt.
20
• The length of the belt can be adjusted using the movable latch on
the belt.

6. Using the wheelchair

6.1. Getting in and out from the side

• Move the wheelchair and the current or future seat as close beside
one another as possible.
• If you want to switch from another wheelchair or indoor frame,
secure it by activating the locking brakes.
• Secure the Pyro Start to prevent it rolling away unintentionally by
activating the brake lever on the left and right hand sides of the
wheelchair.
• Swing away the padded armrest to the back.
• Fold the foot plates to the side or remove the leg rests.
• Now slide sideways onto the other seat.
• Make sure that you sit as far back as possible in the seat.
• Finally, return the leg rests to their original position.
19
Lightweight wheelchair |
6.2. Getting in and out from the
front
• First swing the foot plates up or remove the leg rests.
• Move the Pyro Start and the current or future seating as close as
possible to the front of one another.
• If you want to switch from another wheelchair or indoor frame,
secure it by activating the locking brakes.
• Now slide onto the seat by turning your body.
• Finally, return the leg rests to their original position.
Never climb on the foot plates! RISK OF TIPPING!
Bischoff & Bischoff GmbH | 12.02.2020
PYRO START
20