Function - Endress+Hauser mini-log b version II Manuel De Mise En Service

3. Function

3. Function
The battery powered data-logger is meant for recording data.
The following signals can be directly connected to the unit:
- 0 to 1 V
- 0 to 20 mA
- 4 to 20 mA
- Pt 100
- Potential free contact or 5V DC TTL peak
The value of the input signal can be read off, to scale, in the
correct engineering units on the built-in display.
Engineering units and information text can be individually
written onto the space available on the front of the unit.
Every second the measured value is read in.
The PC-software package delivered with the unit analyses the
data and displays it either graphically or tabular.
All data-logger parameters are set up using this software
package (see chapter 8).
30