Zodiac Baracuda MX 8 Guide Du Propriétaire page 4

Installation
Prepare the Pool
1. Manually vacuum the pool, and make sure the pool filter and pump basket are clean.
2. Close the pool main drain line.
3. Aim the return line fittings down.
Assemble the Hose
The hose uses easy twist-lock connectors. Push and twist the connector on each hose section until they
lock into position with clicking sound. The hose cuffs have three (3) connection positions. Any of the
three (3) positions are sufficient for an air-tight seal.
1. Connect enough hose to reach the farthest point of the pool and then add one more section.
2. Position the hose float on the first hose section, about nine (9) inches from the cleaner head.
3. Twist lock the quick connector on the end of the hose where the head will be connected.
4 4
Skimmer or
Dedicated Suction
Cleaner Line
Hose Float 9"
from Cleaner Head
1 Hose
Section
1 Hose
Section
Hose Float 9"
from Cleaner Head
Skimmer or
Dedicated Suction
Cleaner Line