Orlaco DDIN Mode D'emploi page 8

Front camera
(See Frontcam Manual 0993850)
This option opens the front camera sub menu of the (R)LCD
monitor. This offers the next options:
Enable Frontcam
Activate the front camera functionality (com-
pulsory by law). After enabling this option
you will be able to open a menu if the speed
is higher than 35 km/h, or equal to 0 km/h,
whilst the hand brake is activated (yellow wire)
or if the rear camera is activated (blue wire).
'OFF' Frontcamera off
'3C' for an external camera switch → 3 camera system.
'2C' if a 2-4 camera cable is used → 2 camera system.
Invert Handbrake
Set the polarity of the switching wire that is connected to the
hand brake switch (AUX2, yellow). Enable this option if the
handbrake signal on the yellow wire is inverted.
Pulses per metre
Set the amount of pulses per metre that is sent to the monitor
of the tacho switching wire (AUX1, grey).
Function AUX wire
Defines the function of the AUX1 & AUX2 switching wires
(grey and yellow). Select TCH for the tachometer function
(Tacho to AUX1 and hand brake to AUX2) or ZOO for the
camera zoom function (only available in combination with
an auto focus camera). Use in this case the AUX1 & AUX2
switching wires to zoom in and out.
Attention: How can we back out of the "Front Cam" menu in
case we accidentally activated this?
Answer: There are 2 possibilities:
1. By activating the yellow wire (which is used as an
handbrake signal in a frontcam setup) or activated blue wire
(which is used to activate the rear camera) you can be able to
get into the menu's again and disable the frontcam setting.
2. Alternatively you can press the option button (5) for more
then 15 second to de-activate the frontcam setting.
Default settings
This option opens the factory defaults menu. Choose the
number of the desired factory settings (1 = standard Orlaco).
If the option 'reset default settings' is selected, the factory
settings will be reset. Warning: All user settings will be lost
when the factory defaults are reset.
8
Usermanual
objects in
monitor are
closer than
they appear
Buttons 1 2 3 4 5 6 7 8
UM0208201 R3-5