Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Switch delay
Enable this option if the switch wire is controlled by an inter-
mittent signal, e.g. from an indicator light.
Horizontal Marker
Enable this option to switch the marker on. The marker is
displayed as a horizontal green line.
Marker position
Adjust the horizontal position of the marker. 0 is top of screen,
100 is bottom of screen.
Vertical marker
Activate this option in order to display a reference line. The
reference line will be displayed as a vertical green line. This
option is not available on all (R)LCD models.
Marker position
Adjust the vertical position of the marker. Adjustable between
38 and 63. Left and right changes with the camera mirror
function.
Graticule
This option shows a grid on the display for a rear mounted
camera.
Cinema mode
When enabled the camera image is displayed in wide screen
cinema mode.
Auto focus
Enable this option if an auto focus camera is connected. This
will enable special options only available with an AF camera
and a serial (R)LCD screen. Operation zoom function:
Button 5 - Activate zoom function. Push again button 5 to
Button 6 - Zoom out.
Button 7 - Zoom in.
Back light
Back light compensation is used for an enhanced picture when
looking at dark objects in a light environment. Only available
with an AF camera and a serial (R)LCD screen.
Zero-lux
Enable the zero-lux option to increase light sensitivity in low-
light environ-ments. Only available with an AF camera and a
serial (R)LCD screen.
Stabiliser
This option activates the stabiliser function (if the camera has
this option).
Pan/tilt
Set this option to 'on' to enable pan/tilt control with the option
button.
Brightness
Adjust the brightness of the image.
Contrast
Adjust the contrast of the image.
Saturation
Adjust the saturation of the image.
UM0208201 R3-5
deactivate zoom function.
Usermanual
objects
in
monitor are
closer than
they appear
Buttons 1
2
3
4
5
6
7
8
5
Publicité
Table des Matières
