Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CAN speed
This option selects the bit rate of the CAN bus. Valid options
are 100, 125, 200, 250, 500 and 1000 kbit.
(R)LCD Back light
This option opens the back light submenu. The back light
menu has the following four options:
(R)LCD back light mode
This option enables the automatic back light control
(ABC). The display will adapt its brightness to the
amount of light in the environment Alternatively, a
manual day or night brightness adjustment can be
chosen.
ABC minimum level
These settings define the minimal brightness levels to
the point where the ABC adjustment can adjust down
the levels when there is little ambient light available.
(R)LCD-Backlight day
This option can manually adjust the brightness settings
for the day settings (50 – 100%).
(R)LCD-backlight night
This option can manually adjust the brightness settings
for the night settings (0 –50%).
Scanning
This option opens the camera scanning submenu. This menu
has the following options:
Scan sequence
This option selects the cameras which will be enabled in the
scanning sequence.
Scan interval
This option sets the interval between camera scans.
Camera switch
This option configures the type of video switch that is used.
'OFF' if no camera switch is used →1 camera system.
'3C' for an external camera switch →3 camera system.
'2C' if a 2-4 camera cable is used →2 camera system.
'4C' if a combination of internal and external switch is used and a 2-4 camera cable → 4 camera system.
'QUA' for a quad system, only in combination with the quad switch.
UM0208201 R3-5
Usermanual
objects
in
monitor are
closer than
they appear
Buttons 1
2
3
4
5
6
7
8
7
Publicité
Table des Matières
