Anti-Tipping Safety Assembly - Fhiaba Brilliance Série Notice D'installation

5 5
1
2
3
4
To avoid danger of the appliance tipping over it is
mandatory to secure the appliance to the wall by
means of two special brackets, by providing block-
ing at the top rear of the cabinetry or by fixing at the
profiles to secured cabinetry.
To prevent the appliance from tipping over an extra-long kit is availa-
ble upon request if the appliance needs to remain distanced from the
wall, it is mandatory to install two brackets on the upper part of the ap-
pliance for fixing it securely to the wall. If installing in a cabinet which
is already securely fixed in place, attachment to the cabinet along
the trim strips, as described on the previous pages, will be sufficient to
prevent tipping.
Operate as follows:
2 x
The brackets should be applied as illustrated using the provided
screws and expansion plugs.
6 x
Place a bracket on the top of the appliance in correspondence to the
fixing holes and against the wall
Mark up the holes position on the wall
Drill the wall with an 8 mm (3/8") bit and insert the expansion plug
.
3
Reposition the bracket and fix it first to the cabinet and then to the
wall .
4
Installation Guide
Series: All

Anti-tipping safety assembly

.
1
.
2
www.fhiaba.com · www.thevettagroup.com 21