Electrical And Water Connection - Fhiaba Brilliance Série Notice D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Series: All

Electrical and Water connection

E
W
The Built-in Fhiaba filter cannot make it safe
to drink any water which is not suitable for
human consumption.
The appliance should be connected only to
a drinkable water supply system.
Do not use extension cords or adapters.
Once the appliance is fully installed, connected
to the water supply (if applicable) and opera-
tional, in the event that the water supply must be
turned off,(touch the button
to switch it off) before the main water is shut off to
prevent the appliance from entering a 'NO WATER
IN' alarm state.
8
www.fhiaba.com · www.thevettagroup.com
E
W
The appliances are delivered from the factory for operation at 110V-
120V AC - 60Hz (US and Canada).
They are provided with a suitable supply cable and plug to be con-
nected to an appropriate 15A socket (US and Canada) provided
with an effective grounding.
A circuit breaker should also be installed and should be easily ac-
cessible so that it can be easily switched off before performing any
installation or maintenance.
To connect to the water supply system (for appliances equipped with
ice makers) a 1/4" waterline with accessible shut-off valve must be
supplied.
W
E
The appliance is provided with a water adapter elbow which is suit-
able for high water pressure and complies the Food Regulations.
The water filter cartridge, which is provided with the appliance,
should be installed according to the accompanying instructions. Use
only the new adapter which is supplied with the appliance. The so-
lenoid connection on the appliance is 3/4" diameter but is metric
threaded. A standard garden hose threaded connector such as a
braided stainless hose found at typical hardware stores will strip or
damage the solenoid threads. Use only the supplied 1/4" quick con-
nect elbow adapter for connecting a 1/4" copper or polyethylene
source water line to the appliance.
Electrical cord length: 2500 mm (98 3/8")
Water connection line length: 2500 mm (98 3/8")
Do not use extension cords and/or multiple adapters for the power
supply connection.
W
E
Electrical and water supply behind the unit
Integrated Series
E
W
on control panel
E
W

Publicité

Chapitres

Table des Matières
loading

Table des Matières