Fhiaba Brilliance Série Notice D'installation page 14

Series: Brilliance Integrated (BI)
4
5
7
8
12 www.fhiaba.com · www.thevettagroup.com
Position the brackets on each set of marks to make sure they are
aligned 4 , you may wish to drill pilot holes (pay close attention to
the panel's thickness) .
5
Screw the brackets in place
Drawer Panel
When preparing the Drawer Panel, follow the same instructions as
per the door panel, but make sure measurements are taken starting
from the top edge 7 . The support bracket faces the opposite way
(note imgs 4 and 8).
8
.
6