ABB-Welcome M
5.5
Keypad outdoor station without display (Camera + audio+
keypad)
5.5.1
Calling a resident, just input physical address
In standby mode, a visitor can press the physical
address corresponding to the residence that you want to
call directly, from 001 to 250.
For a complex building, the visitor needs to press the
building number (01~60) + physical address (001~250)
to make a call from a gate station.
5.5.2
Call guard unit
Press the button
30 s
Guard Unit
"*" to Cancel
5.5.3
System settings
Users can enter the system settings by the following steps (during settings, press "#" to
confirm, press "*" to cancel. The default system password is 345678.):
1.
Set the device as an Outdoor Station or a Gate Station.
Outdoor Station:
#* system password #
1 #
=>
1 #
Gate Station:
#* system password #
1 #
=>
2 #
2.
Modify the "system password"
#* system password #
2 #
=>
Enter new password (6-8 bits) #
|
to make a call to a guard unit.
Accept the call
120 s
==>
Guard Unit
"*" to Cancel
=>
=>
=>
Fig. 24
=>
Enter the password again #
Operation
— 39 —