ABB -Welcome M Mode D'emploi page 15

ABB-Welcome M
Fig. 7 Terminal description
No. Functions
1 Call resident
A visitor inputs an indoor station number (001) or apartment number (e.g.
0101, programmed in advance) to call a resident.
*Also, the visitor can select a resident name with the button
button
Meanwhile, pressing the button
*This function is only available in Pic1.
2 Calling the guard unit
A visitor can call a guard unit by pressing the button
available in the system.
3 Unlocking by password
Press"
"LOCK-GND" of the audio module.
Press "
with terminals "COM-NC-NO" of the audio module.
The initial password is 123456 and residents can set their own customized
password with indoor stations.
4 System engineering configuration
Press "
engineering configuration menu.
The initial system password is 345678 and it can be modified by the
administrator.
|
Pic 1
of the accompanying display module to make a call.
+ password+
+2 + + password +
+ + system password +
Terminal description
Pic 2
can cancel the call.
"to release the lock connected with terminals
" to release the 2nd-lock connected
" to enter the system
or the
if the guard unit is
— 14 —