Display Settings - ABB M2233 Serie Mode D'emploi

ABB-Welcome M

4.2.12.11 Display Settings

2
Fig. 30 Display Settings
The "Display Settings" menu has the following functions:
No. Functions
1 Brightness
- Set the brightness of the display with the "Plus / minus" buttons.
2 Enable screensaver
- By tick the checkbox to activate or deactivate the screen saver.
3 Select Screensaver
- The display is preset as digital clock
- If an SD card with suitable pictures is located in the device, you can
select a screen saver through the fold-down menu. If several pictures are
stored in the SD card they are displayed as a slide show.
Slide show (electronic picture frame)
- Each picture appears for 20 seconds.
Picture requirem ents:
- The pictures must be stored in the SD card in the directory "DCIM"
(Digital Camera Images) on the first level.
- The maximum admissible size of a picture is 2048 x 1960 pixels.
- The maximum admissible resolution of a picture is 800 x 480 pixels.
- The resolution of the display is 800 x 600. Larger pictures will be reduced
|
1 9
Operation
8
7
3
4
6
5
— 44 —