Configuring The Local Wireless Network On The Signal Booster; Configuring The Wireless Multi Bridge Settings - Eminent EM4543 Mode D'emploi

Is my router correctly connected to the wall outlet? You can check this by verifying that
the POWER LED is on.
7.2.Configuring the local wireless network on the signal
booster
Before setting the Eminent router for Wireless Multi Bridge usage, you need to have
the following at hand:
•
The network name of the first wireless router (SSID)
•
The security key of the first wireless router
•
The channel of the first wireless router
Preferably, setting up the Wireless Multi Bridge connection is done using a wired
connection between the wireless Eminent router and the computer.
1. Turn on your computer.
2. Open your internet browser (e.g. Internet Explorer or Firefox).
3. Type 'http://192.168.8.1' in the address bar.
4. Press the 'Enter key' or click 'Go to'.
5. Click 'Setup Tool'.
6. You will now be asked for a 'Username' and a 'Password'. Fill out 'admin' in the
'Username' field and 'admin' in the 'Password' field and press the enter key.
7. Click 'Advanced Setup'.
8. Click 'Wireless'.
9. Click 'Wireless Setup'.
10. Fill out a SSID: If you want your current wireless network to be extended using
the same network name (SSID), you need to fill out the SSID as used on your
first wireless router. Also, the channel needs to be the same.
11. Set a security at 'Authentication'. If you want your current wireless network to be
extended using the same network name (SSID), you can set the same security
as used on your first wireless router.
12. Click 'Apply' to save the settings.
13. Then click 'Save' at the top of the screen.

7.3 Configuring the Wireless Multi Bridge settings

1. Click 'Wireless'.
2. Click 'Wireless Multi Bridge'.
3. Set 'Operation' to 'Start'.
4. Make sure 'Wireless Bridge' is selected.
5. Click the 'Search AP' button.
6. Select the network name (SSID) you want to connect to (First wireless router).
7. If the network is secured, you need to fill out the security key.
8. Click 'Apply.
9. Then click 'Save' at the top of the screen.
10. Click 'Network'.
20 |
ENGLISH