Connecting The Signal Booster (2); Configuring The Signal Booster (2) - Eminent EM4543 Mode D'emploi

nd
A 2 EM4543/EM4544/EM4571 as signal repeater
(1)

6.1 Connecting the signal booster (2)

1. Turn off your computer.
2. Connect the router to a wall outlet using the supplied power adapter.
3. Connect the supplied UTP network cable to the 'LAN 1' port of the router.
4. Connect the other end of the UTP network cable to the network adapter of your
computer.
Is my router correctly connected to the wall outlet? You can check this by verifying that
the POWER LED is on.

6.2 Configuring the signal booster (2)

1. Turn on your computer.
2. Open your internet browser (e.g. Internet Explorer or Firefox).
3. Type 'http://192.168.8.1' in the address bar.
4. Press the 'Enter key' or click 'Go to'.
5. Click 'Setup Tool'.
6. You will now be asked for a 'Username' and a 'Password'. Fill out 'admin' in the
'Username' field and 'admin' in the 'Password' field and press the enter key.
7. Click 'Advanced Setup' in the left menu.
8. Click 'Network' in the left menu.
9. Click 'LAN/DHCP Server'.
10. Select 'Stop' at 'DHCP Server'.
11. Click 'Apply' at the right side in the menu 'DHCP Server'.
15 |
ENGLISH
(2)