Securing Your Signal Booster (2) (Wpa2 Aes) - Eminent EM4543 Mode D'emploi

12. Type '192.168.8.200' in the 'LAN IP address' field.
13. Type '255.255.255.0' in the 'Subnet mask' field.
14. Click the button 'Apply & Restart'.
Note! If you wish to log in to your router at a later point in time, you must assign a fixed
IP address to your computer.
1. Click 'Start'.
2. Click 'Control Panel'.
3. Double click 'Network Connections'.
4. Right click the appropriate 'LAN Connection'.
5. Click 'Properties'.
6. Select 'Internet-protocol (TCP/IP)'.
7. Click 'Properties'.
8. Select 'Use the following IP Address'.
9. Enter '192.168.8.25' in the 'IP Address' field.
10. Enter '255.255.255.0' in the 'Subnet mask' field.
11. Click 'OK'.
12. Enter 'http://192.168.8.200' in the address bar to log in to the router.

6.3 Securing your signal booster (2) (WPA2 AES)

If you use the router as a signal booster with another device, WPA2 AES security is
supported. If you use another type of wireless router, WEP security is recommended.
To avoid having uninvited guests probing your wireless network we strongly
recommend securing your wireless network.
1. Click 'Wireless Wizard'.
2. The wizard appears in a pop-up screen. Click 'Next'.
3. Choose you country/region and click 'Next'.
4. Fill out the desired name for your wireless network in the field 'SSID'. (Use the
'Check SSID' option to ensure this name is not already in use.)
5. Click 'Next'.
6. The router will automatically scan for a suitable wireless channel.
7. As a choice, the most suitable wireless channel will appear on your screen.
8. Click 'Next' to confirm this channel. (You can pick a wireless channel yourself if
you want). Write down the chosen channel***.
9. You will see a brief summary with the settings you have made so far. Click 'Next'
to continue.
10. Choose 'WPA2' and click 'Next'.
11. Choose 'AES' and click 'Next'.
12. Fill out a password in the field 'Network Key'. (e.g. 'yourname01'). Do not use any
punctuation marks and make sure the password has e minimum length of 8
characters long.
13. Write down the network name and the chosen password***.
16 |
ENGLISH