Wpa2 Aes Security (Recommended); Wep Security - Eminent EM4543 Mode D'emploi

5.3.1 WPA2 AES security (recommended)

1. Click 'Wireless Wizard'.
2. The wizard appears in a pop-up screen. Click 'Next'.
3. Choose you country/region and click 'Next'.
4. Fill out the desired name for your wireless network in the field 'SSID'. (Use the
'Check SSID' option to ensure this name is not already in use.)
5. Click 'Next'.
6. The router will automatically scan for a suitable wireless channel.
7. As a choice, the most suitable wireless channel will appear on your screen.
8. Click 'Next' to confirm this channel. (You can pick a wireless channel yourself if
you want).
9. You will see a brief summary with the settings you have made so far. Click 'Next'
to continue.
10. Choose 'WPA2' and click 'Next'.
11. Choose 'AES' and click 'Next'.
12. Fill out a password in the 'Network Key' field (e.g. 'yourname1'). Do not use any
punctuation marks and make sure the password is at least 8 characters long!
13. Write down the network name and the chosen password**.
14. Click 'Next'.
15. Click 'Finish'.
16. The wizard will now save the settings and will close the screen automatically.
Hint: WPA2 AES security is supported by Windows XP Service Pack 2 (with all
updated installed). This security method is not supported by Windows 98, unless your
wireless network adapter software supports WPA2 AES. In case you do not have
Windows XP, Vista, Windows 7 or the required software, continue with section 4.3.2.

5.3.2 WEP security

1. Click 'Wireless Wizard'.
2. The wizard appears in a pop-up screen. Click 'Next'.
3. Choose you country/region and click 'Next'.
4. Fill out the desired name for your wireless network in the field 'SSID'. (Use the
'Check SSID' option to ensure this name is not already in use.)
5. Click 'Next'.
6. The router will automatically scan for a suitable wireless channel.
7. As a choice, the most suitable wireless channel will appear on your screen.
8. Click 'Next' to confirm this channel. (You can pick a wireless channel yourself if
you want).
9. You will see a brief summary with the settings you have made so far. Click 'Next'
to continue.
10. Choose 'WEP' and click 'Next'.
11. Choose 'Use a 128 bit key' and click 'Next'.
13 |
ENGLISH