Determining The Connection Method; Configuring The Router For A Dhcp Internet Connection - Eminent EM4543 Mode D'emploi

3. Type 'http://192.168.8.1' in the address bar.
4. Press the enter key or click 'Go to'.
5. A new screen with three different icons appears. These icons are named 'Setup
Tool', 'Internet Wizard' and the 'Wireless Wizard'.
6. Click 'Internet Wizard'.
7. You will now be asked for a 'Username' and a 'Password'. Fill out 'admin' in the
'Username' field and 'admin' in the 'Password' field and press the enter key.
8. Continue with chapter 3.3.
Hint: Click 'Wireless Wizard' if you want to setup the wireless network connection. If
you have selected 'Wireless Wizard' you can continue with chapter 3.4.

3.3 Determining the connection method

To quickly configure the router for a connection to the Internet through your provider
you will first need to determine which connection method your provider is using
('DHCP', 'Static IP', or 'PPPoE' ). Consult the information you received from your
provider or look at table 1.
Internet provider
Caiway
Compuserve with Sagem ADSL modem
KPN ADSL with Thomson Speedtouch 546(i) ADSL modem
OnsBrabantnet
Telfort with Zyxel modem
Tiscali with Zyxel or Sagem modem
UPC Chello
Ziggo
Belgian providers
Telenet with Motorola modem
Table 1.
3.3.1 Configuring the router for a DHCP Internet
connection
For an internet connection using 'DHCP' you can use the following steps.
1. Click 'Internet Wizard'.
2. Select 'Manual Internet Configuration'.
3. Click 'Next'.
4. Select 'DHCP Method'.
5 |
ENGLISH
Connection method
DHCP
DHCP
DHCP
DHCP+MAC Address
DHCP
DHCP
DHCP+MAC Addres
DHCP+MAC Addres
Connection method
DHCP