Connecting Your Wireless Router With The Signal Booster (2); Completing The Installation Of The Signal Booster - Eminent EM4543 Mode D'emploi

20. The wizard will now save the settings and will close the screen automatically.
6.5 Connecting your wireless router with the signal
booster (2)
If you have followed the previous steps, then you have filled in the following:
- The signal booster (2) has the following IP-address: '192.168.8.200'.
- The wireless router has the following IP-address: '192.168.8.1'.
- Both devices are using the WPA2 AES protocol and are both using the same
security key.
- Both devices are using the same channel.
- The SSID does not need to be the same (e.g. 'Upstairs' and 'Downstairs').
Both devices must be set up in order to connect to each other. We will begin setting
up your wireless router (1).
1. Connect the wireless router and the signal booster to each other using the
following steps: Connect a network cable to LAN4 of the wireless router. Connect
the other end of the network cable to LAN4 of the signal booster.
2. Connect a computer using a network cable to LAN port 1 of the wireless router.
3. Turn on the your wireless router and the signal booster.
4. Turn on your computer.
5. Open your web browser (e.g. Internet Explorer or Firefox).
6. Type 'http://192.168.8.1' in the address bar.
7. Click 'Setup Tool'..
8. You will now be asked for a 'Username' and a 'Password'. Fill out 'admin' in the
'Username' field and 'admin' in the 'Password' field and press the enter key.
9. Click 'Advanced Setup' in the left menu.
10. Click 'Wireless' in the left menu.
11. Click 'WDS Setup' in the left menu.
12. Click 'Search AP' in the right screen.
13. A screen appears. A summary of found wireless networks will be displayed.
14. Double-click with the left mouse button on the name (SSID) of the signal booster.
15. Click 'OK'.
16. Click 'Add' in the right screen.
17. Click 'Save' at the top of the right screen.
18. Click 'OK' to save the settings.
19. Close the window.

6.6 Completing the installation of the signal booster

1. Type 'http://192.168.8.200' in the address bar to connect to the signal booster.
2. Click 'Setup Tool'.
3. You will now be asked for a 'Username' and a 'Password'. Fill out 'admin' in the
'Username' field and 'admin' in the 'Password' field and press the enter key.
18 |
ENGLISH