Av Input; Starting Procedure (For Av Source); Starting Procedure (For Camera); Setting The Video Signal - Pioneer AVH-X5700BHS Mode D'emploi

AV input

You can display the video image output by the device connected
to this product.
 External video component and the display on page 52
CAUTION
For safety reasons, video images cannot be viewed while your
vehicle is in motion. To view video images, stop in a safe place
and apply the parking brake.
Starting procedure (for AV
source)
You can display the video image output by the device connected
to video input.
1 Display the "System" setting screen.
2 Touch [Input/Output Settings].
3 Touch [AV Input].
X3700BHS
X5700BHS
Set the setting to "Source".
X4700BS X2700BS X1700S
Set the setting to "On".
4 Display the "AV source selection" screen.
5 Touch [AV].
The image is displayed on the screen.
AV
21
6/10
Full

Starting procedure (for camera)

You can display the image output by the camera connected to
video input.
1 Display the "System" setting screen.
2 Touch [Input/Output Settings].
3 Touch [AV Input] repeatedly, set to "Camera".
4 Display the "AV source selection" screen.
5 Touch [AV].
The image is displayed on the screen.
AV

Setting the video signal

When you connect this product to an AV equipment, select the
suitable video signal setting.
48
p You can operate this function only for the video signal input
into the AV input.
1 Display the "Video Setup" screen.
X3700BHS
X5700BHS
21 48
6/10
Full
2 Touch [Video Signal Setting].
3 Touch [AV].
4 Touch the item you want to set.
The following items are available:
Auto (default), PAL, NTSC, PAL-M, PAL-N, SECAM.
35