Aux Source; Starting Procedure; Setting The Video Signal - Pioneer AVH-X5700BHS Mode D'emploi

SiriusXM
Radio
If "No Teams Selected" is displayed, register the team to be
monitored.
Using Featured Favorites Band
If you set "Featured Favorites" to on, the Featured Favorites
Band which broadcasts the contents according to the time is
added automatically.
1 Display the "Sirius XM Settings" screen.
 Displaying the "Sirius XM Settings" screen on page 33
2 Touch [Featured Favorites] to switch "On"
(default) or "Off".
Restoring the "SiriusXM Settings" to
the default
You can restore the SiriusXM settings to the default.
p This setting is available only when you stop your vehicle in a
safe place and apply the parking brake.
CAUTION
Do not turn off the engine while restoring the settings.
1 Display the "Sirius XM Settings" screen.
 Displaying the "Sirius XM Settings" screen on page 33
2 Touch [SiriusXM Reset].
3 Touch [Restore].
The settings are restored to the default.
p The source is turned off and the Bluetooth connection is
disconnected before the process starts.
34
®
Satellite
AUX
Switches between the screen to
operate video les and that to
operate music les.
is only available when there are both audio and video
p
files on the auxiliary equipment.
p A Mini-jack AV cable (CD-RM10) (sold separately) is required
for connection.
 External video component and the display on page 52
CAUTION
For safety reasons, video images cannot be viewed while your
vehicle is in motion. To view video images, stop in a safe place
and apply the parking brake.

Starting procedure

You can display the video image output by the device connected
to video input.
1 Display the "System" setting screen.
2 Touch [Input/Output Settings].
3 Confirm that "AUX Input" is turned on.
4 Display the "AV source selection" screen.
5 Touch [AUX].
The image is displayed on the screen.

AUX source

21 48
6/10
Full

Setting the video signal

When you connect this product to an AUX equipment, select the
suitable video signal setting.
p You can operate this function only for the video signal input
into the AUX input.
1 Display the "Video Setup" screen.
2 Touch [Video Signal Setting].
3 Touch [AUX].
4 Touch the item you want to set.
The following items are available:
Auto (default), PAL, NTSC, PAL-M, PAL-N, SECAM.