Troubleshooting - Odys -Slim Z8 Manuel D'utilisation

10

Troubleshooting

If your camera does not work properly, please check the following items. If the problem
still exists please contact your dealer.
Symptoms
Error A
Camera does not take photos
Error B
Photos disappear from the LCD
after a period
Error C
Not all images can be
downloaded to the PC
Error D
Camera switches off after 5
minutes. LCD switches off.
Error E
When the camera is connected
to the PC for the first time, no
new hardware is found.
Error F
The shot to shot time is longer
when taking pictures in dark
conditions.
Error G
The camera does not start after
connection to the PC. The
camera display lights up and
LCD shows all symbols.
Note: This table contains possible causes of error. Some of these are normal phenomena.
ODYS SL IM Z8
Cause and solution
Cause: Not enough light
Change angle of camera to include more light
Solution:
or use automatic flash.
Cause: Weak batteries
Solution: Insert two fresh batteries.
Cause: The PC does not have enough free RAM.
Close all other applications before
downloading. If the problem persists,
Solution: download the images one at a time to the PC
and save them there before transferring the
next image.
Cause: Camera shuts down automatically.
Solution: Restart camera.
The PC's USB port is deactivated in the
Cause:
BIOS.
Solution: Activate the port in the PC's BIOS.
It is normal for the shutter speed to be slower
Cause:
in dark conditions.
Change the camera angle or improve the light
Solution:
conditions.
PC or camera is busy and there is no
Cause:
connection between the two.
Disconnect the USB cable from the PC,
Solution: check why the PC is busy and insert the
cable again.
35