Setting The Logo - Odys -Slim Z8 Manuel D'utilisation

1
Press the
2
Select the "Date&Time" item in the menu and press OK to confirm.
3
Now change the time setting. Select the setting
required using the control buttons
then change the value using the
buttons.
Press OK to confirm the values after you have
finished making the settings.
The date and time can only be displayed by the camera in playback mode.
They cannot be printed.
The time settings are saved by an internal backup battery. Therefore, the
time settings are not lost when the two replaceable AAA batteries are
removed. The settings are not lost until the internal backup battery is flat.
5.14

Setting the LOGO

The LOGO is the startup image which is shown on the display when the camera is
activated. This allows the user to define individual images. To do so, proceed as follows:
1
Press the
menu button and select the "Set Logo" item.
2
After setting the logo, select the option "Play Logo" in the playback mode menu.
There are two options:
• Enable: The image selected by the user is used as the startup image.
• Disable: The preset image is the startup image.
The startup image is not deleted when images are deleted or the memory is
formatted. To set another startup image, you must repeat the procedure
described above.
ODYS SL IM Z8
button to activate the configuration menu.
button to start playback mode. Open the required photo Press the
and , and
and control
27