Safety; Importance Of The Operating Manual; Authorised Use - THOMSON WM60-370ZRT Instructions De Montage Et De Maintenance

Safety

1 Safety
The equipment is built to the modern state of technology and the relevant regulations. Special
attention has been paid to the safety of the user.
The equipment conforms to the EU Machine Guideline, the harmonised standards, European
standards or the corresponding national standards:
SS-EN 12100-1 and SS-EN 12100-2:
Ÿ
Safety of Machines, Equipment and Systems
DIN EN 418:
Ÿ
Safety of Machines, Emergency-Off devices
DIN EN 60 204:
Ÿ
Electrical equipment for Industrial machines
DIN EN 50 081-2 and DIN EN 50 082-2:
Ÿ
Electromagnetic compatibility EMC
This is confirmed by a manufacturer's declaration.
The following regulations must be complied with:
the relevant regulations for the prevention of accidents,
Ÿ
generally recognised safety regulations,
Ÿ
EU guidelines,
Ÿ
any other applicable standards
Ÿ
national regulations.
Ÿ
1.1

Importance of the operating manual

The operating manual is part of the unit and must:
Always be kept handy until disposal of the unit.
Ÿ
Be passed on when the unit is being sold, alienated or rented.
Ÿ
If there is anything in the operating manual that you do not understand, you absolutely must
contact the manufacturer.
Inevitable residual risks for people and material assets come from this unit. For this reason,
everybody working on this unit and dealing with its transport, mounting, operating,
maintenance and repairs must be introduced to the job, and know the potential dangers. For
that it is necessary to carefully read, understand and respect the safety instructions.
Lacking or insufficient knowledge of the operating instructions lead to the loss of all claim
liability against Tollo Linear AB. We therefore recommend the user
to get a written confirmation from the operators that they have been introduced to the unit.
1.2

Authorised use

The mechanical linear drive units WIESEL POWERLine ZRT
positioning, continuously moving, conveying, palletising, loading, unloading, clamping,
tensioning, checking, measuring, handling, manipulating, and pushing workpieces or tools.
In general, the main uses of the POWERLine ZRT
Chapter 2 "Product description" and Chapter 10 "Technical data ").
Any other or additional use is considered as unauthorised. The manufacturer is not liable for
damages resulting from such applications. The user alone bears the risk.
Since the linear drive units can be applied in various areas, the user is responsible for the
specific application as soon as use begins.
To ensure the electromagnetic compatibility of machines (EMC regulations), the mechanical
linear drive units WIESEL POWERLine ZRT
(according to Definition EN 50 081-2, see Chapter 5 "Commissioning")
22
42/08
®
series must be taken into account (cf.
®
must be used only in an industrial environment
®
are designed exclusively for
WIESEL POWERLine ZRT
®