AE REU Notice D'utilisation Et De Montage page 10

en
REU - RDU - RDW - RSW - RUL
Horizontal installation in a horizontal tank
The length of the flange tube must not exceed max. 130mm in order to ensure that the
temperature sensor and the heating element extend far enough into the boiler. The heater
must be fitted as low in the boiler as possible so that the entire content of the boiler is
heated evenly. It is not essential that the heating elements extend throughout the available
installation depth. In front of the boiler flange, some mounting space is required (installed
length + 100mm). Boiler scale affects the function of the heater. If the lime concentration of
the water is very high, it is necessary to take appropriate measures, for instance lowering the
temperature, installation of softening equipment, removal of the boiler scale.
10 |
Id.Nr.: 242782-1