BELKIN:
1. Login to the router.
2. Choose "Firewall", select "Virtual Servers"
3. Input the port (do not use 80) and IP address, then click save.
NOTE: The port and IP address should be the same as the Camera.
DLINK:
1. Login the router.
2. Choose "Advanced", select "Virtual Servers"
3. Input the port, IP address, Protocol, then click save.
NOTE: The "public port" & "private port" should be the same as camera's port, choose the protocol to be "both".
Now you are finished setting up your camera. The next steps explain additional features of your camera and FAQ.
Jul 2013
Figure 7.6
Figure 7.7
36
IPV38 / IPV38WE