Upnp Settings - Ebode IPV38 Guide Utilisateur

1.9.4 UPnP Settings (use always!)
If we want to be able to see our camera live video from a computer outside our network, for example when we are at
work, we have to do some advanced settings in our router. For most people this will be a difficult step, but we will try to
help you out. UPnP stands for Universal plug n Play device. UPnP will do the port forwarding in the router for us, so we
don`t need to do this manually. In order to use this function we need to have a router that is capable of using UPnP
devices. Please make sure your router supports UPnP (please check the manual of your router to determine if it supports
UPnP), if not please skip the next step and continue with step 3.7 DDNS Service Settings. By default UPnP is most likely
disabled in your router. Please refer to the router manual to enable UPnP and enable UPnP.
Click Network > UPnP Settings to choose Using UPnP to Map Port:
Select UPnP and click Submit, then the camera will support UPnP port forwarding automatically. It is helpful for using
DDNS (viewing live video from outside our network). As soon as you have enabled UPnP in you router, please proceed
with the next steps.
Jul 2013

Figure 6.8
Figure 6.9
27 IPV38 / IPV38WE